Calibration Tool Rounding

From: John Henderson [mailto:john.henderson@djh.com]
Sent: Sunday, December 18, 2005 3:08 PM
To: 'Theo.Stalls@bluescopesteel.com'
Subject: RE: DJH Designs...How to round off results

Hi Theo,

What calibration tool size have you set the lens too? If you calibration tool is a KR812 then the calibration tool size should be .1mm if it is a KR806 or 807 then the tool size should be .010”

Regards
John

(now this is a juicy email, KR806, ooh makes me shiver)